OTP TOP

Buy NowTOGGLE .:. Dynamic and Programmable Channel Switching
by Molten Voltage

Re-imagine your effects seven different ways with the new TOGGLE pedal by Molten Voltage.  TOGGLE features Dynamic and Programmable Channel Switching, allowing you to switch between two different analog effect loops using either a tap tempo control or the intensity of your playing.

At the core, TOGGLE is a true analog, true bypass, bombproof A/B channel switching pedal, and of course that mode is available.  But that is where the similarities between TOGGLE and every other channel switching pedal end...

angled

 




Tap Modes:

TOGGLE's first mode is TapSwing!

In TapSwing! mode, TOGGLE alternates between Channels A and B at the same speed you tap the button.  TapSwing! adds a whole new dimension to tap tempo control by allowing you to independently set the "on" time for each channel and make it swing!

This is done by tapping the Tap/Channel button three times.  Two taps results in a steady pulse.

If you want to double your tempo, switch to TapTwo and press once.  If you want triplets, switch to TapTriplet and press once.  If you want to quadruple your tempo, you guessed it, switch to TapFour and press once.

TapTwo, TapTriplet, and TapFour can also be used as primary effects in the same manner as TapSwing!, with the resulting tempo 2, 3, or 4 times as fast as you tap.

Strum Modes:

With StrumTrigger, TOGGLE allows you to switch effect loops based on the intensity of your playing.  While you are strumming hard, the channel is toggled, while you are hardly strumming it's not.

When you enter StrumTrigger mode, Channel A is primary and will be heard while you play softly.  TOGGLE will switch to Channel B while you play loud.  Pressing the Tap/Channel button swaps the primary and secondary channels.

 

In StrumLatch mode, TOGGLE switches channels with each distinct hard strum.  During soft strumming or consistent loud playing, the channel stays latched.  When you play softly then play loud again, TOGGLE switches channels and latches on the new channel.

Pressing the Tap/Channel button switches channels manually.

Playing StrumLatch is totally intuitive.  StrumLatch lets you funk to the music in a way that no pedal ever has.

 

External Trigger:

TOGGLE also includes an External Trigger input so the StrumTrigger and StrumLatch modes can be triggered using an external audio source, whether it is a pulse, a different instrument, or even a microphone!  The External Trigger overrides the Input signal for switching purposes but is isolated from the audio signal path.

The External Trigger level or your instrument's signal level can be modulated using the Gain control over a wide dynamic range.  The Gain control does not affect the audio signal path.

The output level of each channel can also be independently controlled with the Level Out knobs.

 

Power:

TOGGLE is designed to run off 6 AA rechargeable batteries that can be inserted by removing its six screws with a Phillips screwdriver.

TOGGLE can also utilize a 9-25 volt, 2.1 or 2.5mm, tip positive, DC power supply (minimum 140mA) which overrides the batteries.  Batteries and power supply are not included.

Because TOGGLE is built using only the highest quality components, it makes a great production tool to make your recordings sound out of this world!

Dimensions: 7.3" (186mm) Wide x 4.8" (122mm) Deep x 2.3" (59mm) Tall

Hand built in Oregon, USA by Molten Voltage.




TOGGLE Owner's Manual